Sceptre X22WG-1080P User Manual download pdf (Page 34)

Page34 SCEPTRE X22

Troubleshooting

Problem Possible solutions

DISPLAY IS

UNCLEAR AND

UNSTABLE

To stabilize and clarify your display, use

the AUTO ADJUST function or change

the resolution to the display’s optimal

setting 1680 X 1050 at 60Hz, then AUTO

ADJUST.

THERE IS NO

LCD DISPLAY

or SCREEN

SAYS NO

VIDEO

Make sure you switched to the correct

source. Check both sources to see video

is on the other source. Check your video

cable. It might be corrupt. Swap out the

video cable for another one to see if the

monitor will work. Check your power plug.

See if it is fully plugged in on both the

monitor and the wall.

MONITOR

SAYS “SIGNAL

OUT OF

RANGE”

If you have a CRT monitor, please

connect the CRT monitor to the computer

and change the refresh rate down to

60Hz via your video card’s display

settings menu. After the setting of 60Hz

has been change you can then use the

LCD on the computer.

1. To change the setting go to

display settings by right clicking

on your desktop with nothing

selected. Choose the

PROPERTIES option.

2. Click on the SETTINGS tab, then

click on the ADVANCED button.

3. Click on the MONITOR tab and

change the refresh rate to 60Hz.

4. Click on OK 2-3 times to finalize

your change.

If you do NOT have a CRT monitor or it’s

already broken, please make sure both

the X22 monitor and your computer is

turned off.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments