Sceptre X420BV-F120 User Manual download pdf (Page 22)

- 22 -

www.SCEPTRE.com

SCEPTRE X420 HDTV User Manual

4. Turn on the power of the X420 LCD HDTV and your PC.

5. Use the remote control’s source button or the source button on the TV to switch to

VGA.

6. Change your PC resolution to 1920x1080 at 60hz refresh rate.

7. Press MENU to use the OSD’s SETUP option.

8. Under the SETUP option select PC function.

9. Under VGA function use AUTO ADJUST to adjust the screen.

Please Note :

 For the best results, please set your PC resolution to 1920x1080 at 60

Hz. Please refer to the PC or graphic card’s manual for further

instructions on how to set your resolution and refresh rate.

 Please refer to your PC manual for video output requirements of the

video card.

 The VGA port of the TV features a power saving mode which will

automatically turn off the TV, if there’s no signal provided for more than

5 minutes.

Connecting a Digital Audio Receiver with Optical SPDIF…

1. Make sure the power of X420 LCD HDTV and your receiver is turned off.

2. Obtain an optical SPDIF cable, connect it to your receiver’s optical

SPDIF digital input and the optical SPDIF connection on the LINE OUT

port on the back of the X420 LCD HDTV.

3. Turn on the X420 LCD HDTV and your receiver.

Please Note :

 If you want pure digital stream for your receiver to decode, you

must also configure the TV’s OSD Sound->Digital Audio Out

function. Make sure the option is on 5.1CH.

 If your receiver is making static noises when receiving 5.1CH,

you must use the PCM option instead.

 Please reference the receiver’s manual as well, to make sure

the receiver is configured to receive signals correctly from the

TV.

 The TV’s SPDIF out for 5.1CH is ONLY used for

antenna/cable connection. Any other incoming audio

signal will be passed out of SPDIF in PCM format.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

No comments

Sceptre X420BV-F120 User Manual Page 22