Sceptre X420BV-F120 User Manual download pdf (Page 45)

- 45 -

www.SCEPTRE.com

SCEPTRE X420 HDTV User Manual

Problems

Solutions

TV CHANNELS ARE

BLOCKED

Check your auto lock function’s settings inside the OSD. You

may have locked up some channels but forgot about them.

UNIVERSAL

REMOTE CODE

This TV follows SONY’s universal remote code. Please check

your hand book for SONY’s codes then apply them.

THE TV TURNS ON

OR OFF SLOWLY

AND THE SCREEN

SHOWS UP

SLOWLY

This TV is a High Definition liquid crystal display panel TV. It

requires a few more seconds than normal TVs to power up and

show the picture.

NO SOUND ON PC

Make sure you have a 3.5 mm mini-jack cable connected from

your pc’s sound output to the TV’s VGA STEREO INPUT.

HDCP VIDEO SAYS

NO HDCP SUPPORT

Reboot your HDCP video device but turning them off and

unplugging the power cord. Wait up to 8 minutes to plug the

power back in to see if it works or not.

HDCP VIDEO HAS

NO AUDIO

Make sure you have a 3.5 mm mini-jack cable connected from

your HDCP video device’s sound output to the TV’s VGA

STEREO INPUT. If your HDCP video device uses RCA AUDIO

jacks, you’ll need to obtain a RCA audio converted into 3.5 mm

mini-jack cable.

CANNOT GET

1920X1080 ON PC

VGA

Make sure the TV is recognized as plug and play monitor. Try

updating your video card’s drivers as well. If that does not help,

most likely you’ll need to upgrade your video card to a newer

one.

PICTURE IS

DISTORTED OR

HAS ABNORMAL

SOUND

This might be from interference from large electrical appliances,

cars, motorcycles, or fluorescent lights. If the TV is close to the

wall, try moving the TV to another room in your house to see if

the problem still occurs.

PICTURE DOES

NOT COVER THE

ENTIRE SCREEN

If you’re using HDMI or a TV digital channel make sure you use

the ASPECT button to switch to 16:9 format. If you are using

VGA, use the AUTO ADJUST function to adjust to the screen.

Please Note : If you are using regular analog TV, AV, or

component in 480i resolution, use the ASPECT button to switch

to 16:9 in order to fill up the screen. Please Note : This note

this feature will distort the picture.

PICTURE QUALITY

IS HORRIBLE!!

For best image quality, view HD widescreen programs where

possible. If HD content is not available view “Standard

Definition” from a digital source. Standard, analog TV will

always be noticeable inferior to HD because your X420 LCD

HDTV has video that is many times better than old TV’s and so

you can see interference and deficiencies you did not KNOW

you had.

PICTURE HAS

PIXELS THAT ARE

ALWAYS

DISPLAYING THE

SAME COLOR

Your X420 LCD HDTV is manufactured using an extremely high

level of precision technology, however, sometimes some pixels

of your X420 LCD HDTV may not display. Pixels defects within

industry specifications are inherent to this type of product and

do not constitute a defective product.

I CANNOT CHANGE

THE TIME

MANUALLY

Your X420 LCD HDTV syncs time automatically according to

your local TV channel. This function only works while the TV’s

tuner is connected to an ANTENNA.

BIG BLACK BOX IN

THE MIDDLE OF

SCREEN

You have turned on closed captioning and are using TEXT1 –

TEXT4. Change the setting to CC1 or turn off closed captioning

and the box will disappear.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Sceptre X420BV-F120 User Manual Page 45

Comments to this Manuals

Related products and manuals for Televisions Sceptre X420BV-F120